An MG TB

email Dave Braun at dave@dbraun99.com (click here)

Carbs on bench	Finished TB 0001	Finished TB 0002	Finished TB 0003	TB outside
Installing the VW steering box. The bishop cam system...	A bit of grinding, trimming and drilling was required.	Locating the VW steering box. It installs upside down...	Another view of the VW steering box.	Checking gears installed in rear axle. These were the...
Another view of the gears.	Install Diff in axle 03	Applying the Hylomar. A flexible sealant that stays...	Rear differential installed with plenty of Hylomar.	Updating the rear axle shaft nuts and brakes in...
More rear brake work	New axle tube nuts and shafts 04	Hubs in place.	Hubs in place	Nice inner view of the Alfin Drums, just prior to...
The new Alfin Drums as seen through the spokes of the 19...	Finally got around to checking the alignment, and found...	We removed the alfin drum to provide clearance to distort...	Tie rod in the vise being adjusted. Ended up using trial...	Prep for clutch removal (1)
Prep for clutch removal (2)	Prep for clutch removal (3)	Floorboards and hardware (1)	Floorboards and hardware (2)	Floorboards and hardware (3)
Floorboards and hardware (4)	Floorboards and hardware (5)	Floorboards and hardware (6)	Floorboards and hardware (7)	Propshaft to one side
Upper toeboard fasteners (1)	Upper toeboard fasteners (2)	Upper toeboard fasteners (3)	Upper toeboard fasteners (4)	brake pedal and brake switch spring (1)
brake pedal and brake switch spring (2)	Brake contact spring	clutch pedal spring	Clutch belcrank with nail for taper pin	Bellhousing bolts
Gearbox mounts	Replace mounts	No taper pin in shaft either	Withdrawing bent shaft and bearing	Bellhousing bearing
Bent shaft and clutch belcrank	Wear of clutch and throwout bearing (1)	Wear of clutch and throwout bearing (2)	Wear of clutch and throwout bearing (3)

Total images: 54 | Last update: 2/5/14 2:26 PM | Create web photo albums with Jalbum | Chameleon skin | Help